Westermo ED-10 TCP - Manual (Page 28)

28 6609-2211
7.3.2. Packing algorithm
End of frame character, EoF Char
ASCII code of character indicating end of frame (0-255). The serial data buffered will be
sent over network when this character 0 - 255 is detected (e.g. 13 for Carriage return).
256 will deactivate this function.
Allowed values are 0 – 256.
Default is 256, i.e. deactivated.
End of Frame Delay
The time, after last received character, ED-10 TCP delays until the buffered data frame
is sent over network. Allowed values are 0-2550 ms, 1–9 in 1 ms step and 10–2550 in
10 ms step. The value will be rounded to the nearest lower step (e.g. 128 => 120 ms,
132 =>130 ms).
The value zero (0) deactivates this function, i.e. wait until other criteria is true.
Default value is 20 ms.
If EoF delay is used with low data rates, it should be set to at least one character time.
Note.
Latency has to be added to calculate total delay of data.
Maximum number of bytes/characters in frame
The maximum number of bytes that will be buffered in the data frame. When the data
frame is full the data will be transmitted over network.
Allowed values are 1–1500 bytes. Values above 255 are approximate.
Default is 1000 bytes.
TCP might override this setting.
Transmit end of frame character
Include end of frame character in Network data packet. Allowed alternatives are yes
or no. Default is yes.