ZeeVee Using Maestro (QAM) - Manual (Page 16)

N A | 1 6 w w w . z e e v e e . c o m
U S I N G M A E S T R O
Network Tab
— Advanced Controls
Click here to show
Advanced Controls
DNS 1, DNS 2 – (Optional setting) Used only when
assigning static IP address.
NTP 1, NTP2 – Network Time Protocol (NTP)
is an optional setting used to assign time on the
network or unit. This setting is required when using
the Emergency Alert System (EAS) and can bet set
whether IP address is static or DHCP.
Mac Address – This address is for information only
and cannot be edited.