ACTi CMS 2 - Manual (Page 14)

www.acti.com
CMS 2.0 System Administrator’s Manual
14
Getting Started
System Requirements
The performance of CMS is largely determined by the computer hardware capability. The table
below provides basic guidelines for selecting proper computer hardware (*1) . The Minimum PC
Spec will provide acceptable performance. You can make use of the utility PC Selector
available on www.acti.com/pcselector to select proper PC hardware in just a few clicks.
For a system that has more than 1600 channels or more than 16 live view channels should
satisfy Recommended PC Spec for good performance.
*1 These specifications are based on following camera settings:
Single stream mode 1280x1024, 3Mbps, 18fps, MPEG-4
Dual stream mode1280x1024, 3Mbps, 18fps, H.264 (recording);
640x480, Quality: 100, 18fps, MJPEG (live view).
*2 Live view of multiple channels requires good hardware for smooth performance. If your
live view performance is not satisfactory, please reduce the number of channels viewed at
the same time, and use Layout Patrol to scan through all the channels or views instead.
Minimum
PC Spec
Display
Mode
Live Layout
(*2)
Number of Channels
1-16,00 1,601-unlimited
CPU
Server PC +
Local Client
1-16 Intel Core 2 Quad 2.4 GHz Intel Core i5 2.4 GHz
17-64 Intel Core i5 2.4 GHz Intel Core i7-920 2.67 GHz
Server PC No Live View Intel Core 2 Quad 2.4 GHz Intel Core i5 2.4 GHz
Remote
Client PC
11-16 Intel Core 2 Quad 2.4 GHz Intel Core i5 2.4 GHz
17-64 Intel Core i5 2.4 GHz Intel Core i7-920 2.67 GHz
RAM 4GB (*3)
Operating
System
Windows 8, Windows 7, Windows Server 2012, Windows Server 2008 (*4)
Browser Internet Explorer 9.0 and 10.0
Network Ethernet (1000 Base-T recommended)
Display Resolution: 1024 X 768 or higher
Recommended
PC Spec
O/S: Windows 7 (latest service packs), Browser: Internet Explorer 9 (Web client),
CPU: Intel Core i7-920 2.67 GHz, RAM: 4GB, Display Resolution: 1080p
Network Adapter: Ethernet 1000 Base-T