ACTi CMS 2 - Manual (Page 48)

www.acti.com
CMS 2.0 System Administrator’s Manual
48
Status Icon Description
On Live View screen or Setup page Source tab, the icons shown under All Sources
category will display the status of each NVR server as well as the devices.
Example Icon Status Description
Video loss :
CMS cannot retrieve the video stream.
Modification has not been saved :
This device’s settings have been modified but not saved yet. If you leave
these modifications unsaved, they will not take effect.
Connection loss :
CMS cannot build up connection with this NVR or device. Please check the
connection settings (including IP Address, Port number, Account Name and
Password) ; or increase the “Connection Timeout” to allow more time for
the device or NVR to respond.
Disk Full :
The storage space of this NVR server is full, and no recording is taking
place. You will need to go to Setup  Source tab and configure the
Storage settings in Source Setup List.
Recording :
This device is currently connected, and video is being recorded either
manually or according to the schedule. The orange “SD” sign indicates that
this device supports local storage.
Connected :
This device is currently connected, and the video stream is viewable on
Live screen.
You have blocked the system event messages sent from this server, which
means the current status of this server is invisible now.