Synchronize device settings, Imported devices: 2 and 4 selected devices:2 and 4 – ACTi CMS 2 User Manual
Page 44
CMS 2.0 System Administrator’s Manual
want to import and click “Apply”.
4. The Using Devices list will be updated in accordance with your selection on Import
Devices list.
Synchronize Device Settings
The configurations done on NVR site will not be synchronized with CMS server actively. For
example, an NVR administrator may replace several cameras (which have also been imported
to CMS server) with new ones, and therefore the CMS site would lose the connections
between those replaced cameras. On CMS site, you can synchronize with an NVR server via
one click:
1. Go to Setup page Sources tab, on All Sources list, select this NVR.
2.
On the right, click “Sync Devices” button.
3.
Click “Apply”.
Imported Devices: 2 and 4
Selected Devices:2 and 4
Tip
Whenever your CMS server loses connections with certain devices, it is always suggested
that you click this button first, since the loss of connection probably resulted
from some changes done on the NVR site.