Step 4: add video source, Step 5: add a map – ACTi CMS 2 User Manual
Page 63
Advertising
CMS 2.0 System Administrator’s Manual
Step 4: Add Video Source
In edit mode, move the mouse over the channel
and click to select a camera from the source
list. You may also directly pull a camera from the
Device panel to your desired channel.
Remove the camera view: right-click on the channel and s
elect “Remove”.
Step 5: Add a Map
By adding a map, you put a picture on the channel, where you may place camera icons later to
make it an “e-Map.
In edit mode, move the mouse over the channel
and click to upload a map. Please input the
Map Name, select the image location (file format
must be JPG) and click “Apply”.
Advertising