ACTi CMS 2 - Manual (Page 67)

www.acti.com
CMS 2.0 System Administrator’s Manual
67
Step 8: Save the View
Click on View Toolbar to save it.
Step 9: Set Default View
To set a View as default, select it in the View List panel and then click on View Tool Bar.
By next time you log in, you will directly enter this View.
Step 10: Set Default Hotspot Channel (Optional)
By system default, the global hotspot channel will always be the top left one. You can set any
other channel on your live view screen to be the default hotspot channel. Right-click on the
channel and select “Default Hotspot” , then click on View Tool
Bar to save it.
Step 11: Set Fisheye Camera Mode
Define a view for a fisheye camera channel by selecting its mode and using ePTZ control.
Please note that the maximum number of fisheye channels on the same View is 16.
1. On this channel, right-click to bring up channel menu , click “Fisheye Mode” and select one
mode.
2. After the fisheye mode is selected, click a region of interest.
Use PTZ Panel controls to operate PTZ movements:
Click the mouse anywhere on the view to pan/tilt, scroll the mouse wheel to zoom in/out.
8 directional buttons
Zoom in / Zoom out
ePTZ Controls on PTZ Panel