ACTi CMS 2 - Manual (Page 19)

www.acti.com
CMS 2.0 System Administrator’s Manual
19
When selecting Setup Type, the default “Complete” will have the program installed on
default C drive, you may select “Custom” to choose another program location.
3. The IP Port Checker will pop up to confirm the CMS port number. The installation
program will use 80 as default. You may enter another available port number in “Listen
Port ” field and click “Apply”.
You may just click “Apply” if you are not sure whether this port has been taken or not.
If the port is being used by another service, you will be asked to input another
available port number.