H3C Technologies H3C WA3600 Series Access Points - Manual (Page 352)

339
Figure 368 Configure the working channel
4. Enable 802.11n(5GHz) radio (By default, 802.11n(5GHz) is enabled.).
Select Radio > Radio from the navigation tree to enter the Radio page. Make sure 802.11n(5GHz)
is enabled.
5. Enable WDS
a. Select Wireless Service > WDS from the navigation tree to enter the WDS Setup page.
b. Select the box corresponding to 802.11n(5GHz).
c. Click Enable.
Figure 369 WDS setup page
Verifying the configuration
You can view the WDS information on the page you enter by selecting Summary > WDS from the
navigation tree.