H3C Technologies H3C SecPath F1000-E - Manual (Page 108)

97
Item Description
Flow Information
Flow information:
• If the protocol type is TCP or UDP, the displayed flow information is source IP
address:source port-->destination IP address:destination port, for example,
1.1.1.2:1026-->1.1.2.10:69.
• If the protocol type is another type except TCP or UDP, the displayed flow
information is source IP address-->destination IP address, for example,
1.1.1.2-->1.1.2.10.
Received Packets/Bytes Number of received packets/bytes.
Send Packets/Bytes Number of sent packets/bytes.
Source VPN Source VPN of the packets.
Destination VPN Destination VPN of the packets.
Start Time Time when a flow was created.
End Time Time when a flow was removed.
Flow Action
Operator field of a flow:
• (1)Normal over—The flow ended normally.
• (2)Aged for timeout—Timer timed out.
• (3)Aged for reset or config-change—Flow aging due to configuration change.
• (4)Aged for no enough resource—Flow aging due insufficient resource.
• (5)Aged for no-pat of NAT—One to one NAT. In this case, only the source IP
address, the source IP address after translation and the time fields are available.
• (6)Active data flow timeout—The life time of the flow reached the limit.
• (8)Data flow created—Record for the flow when it was created.
• (254)Other—Other reasons.