H3C Technologies H3C SecPath F1000-E - Manual (Page 175)

164
Figure 73 Specifying the host name (or IP address)
In the window shown in Figure 73 , click Open to connect to the server. If the connection is normal,
you will be prompted to enter the username and password. After entering the username (client001)
and password (aabbcc), you can enter the configuration interface of SecPath.
Publickey authentication enabled SSH server configuration
example
Network requirements
As shown in Figure 74 , a host (the SSH client) and SecPath (the SSH server) are directly connected
through Ethernet interfaces. Configure an SSH user on SecPath so that the host can securely log in to
SecPath after passing publickey authentication. Use the RSA public key algorithm.
Figure 74 Network diagram