H3C Technologies H3C SecPath F1000-E - Manual (Page 47)

36
Figure 16 Patches that are activated
RUNNING state
After you confirm ACTIVE patches, their states change to RUNNING and persist after a reboot. In
contrast to ACTIVE patches, RUNNING patches continue to take effect after a reboot. For example, if you
confirm the first three patches in
Figure 16 , their state changes from ACTIVE to RUNNING, and the
RUNNING state persists after a reboot. Figure 17 shows the patch states in the system.
Figure 17 Patches in RUNNING state
Patch installation task list
Task Remarks
Install patches:
• Installing and running a patch in one step
• Installing a patch step by step
Use either method.
Step-by-step patch installation allows you to
control the patch status.
Uninstalling a patch step by step Optional.
Installation prerequisites
To ensure a successful patch operation and normal device operation after the patch installation: