Configuration procedure – H3C Technologies H3C SecPath F1000-E User Manual
Page 208
Advertising
197
Configuration procedure
# Specify the IP address of the log host.
•
Select Log Report > Syslog from the navigation tree of the SecPath and perform the following
configurations as shown in
Figure 103 Specifying the IP address of the log host
•
Enter 10.1.1.10 for Log Host1.
•
Click Apply.
# Configure customized service resources.
•
Select Resource > Service > Customized Service from the navigation tree and then click Add to
perform the following configurations as shown in
.
Advertising
This manual is related to the following products: