Set channel properties, Using the channel tab – Grass Valley iTX System v.2.6 User Manual
Page 141
Configuring channels
To do so, you use the View Selector to select any view that includes the channel; you then
select the channel in the Channel Selector.
The text box in the Common Channel Configuration panel shows the channel name:
Set channel properties
1.
Select a channel.
2.
Use the features under the Channel tab to set the new properties.
The Save button flashes green to indicate there are unsaved changes.
3.
Click Save.
iTX updates the channel properties. The Save button stops flashing.
Note:
•
You can cancel any changes by clicking Cancel instead of Save.
•
You can restore the default settings by clicking Default.
Using the Channel tab
You set the main channel properties under the Channel tab of the Channel Configuration pop-
up layout. The features you use to do this are grouped under sub-tabs under the Channel tab.
For a playout or edit channel, there are five sub-tabs:
•
Channel Config 1
•
Channel Config 2
•
Channel Config 3
•
Channel Config 4
•
Media Keep List
For a cache channel, there is an extra sub-tab:
•
Cache Settings
March 2015
System Administrator Guide
Page 141 of 404