Grass Valley iTX System v.2.6 - Manual (Page 212)

Configuring the audio output for a playout channel
Testing a channel-mapping configuration
From the Audio Mapping panel, you can test the audio mapping for a selected media file. When
you do this, iTX creates a report that lists all available audio tracks and describes the effect of
the configuration. It displays the report in the Report Viewer:
Below is an example of a test report for a clip with 8 audio tracks.
Mapping XML:
<XMLExtension>
<Outputs>
<Output pin="1" type="5" language="ITA" staticTrack="Unset" />
</Outputs>
</XMLExtension>
Clip track info:
Test Clip
Audio track0 : Group0 ITA, 00:00:30 ms, 1 channels, 24 bit, 48000
hz, PCM, PCM
Audio track1 : Group1 ITA, 00:00:30 ms, 1 channels, 24 bit, 48000
hz, PCM, PCM
Audio track2 : Group2 NLD, 00:00:30 ms, 1 channels, 24 bit, 48000
hz, PCM, PCM
Audio track3 : Group3 00:00:30 ms, 1 channels, 24 bit, 48000 hz,
PCM, PCM
Audio track4 : Group4 00:00:30 ms, 1 channels, 24 bit, 48000 hz,
PCM, PCM
Audio track5 : Group5 00:00:30 ms, 1 channels, 24 bit, 48000 hz,
PCM, PCM
Audio track6 : Group6 RUS, 00:00:30 ms, 1 channels, 24 bit, 48000
hz, PCM, PCM
Audio track7 : Group7 SLV, 00:00:30 ms, 1 channels, 24 bit, 48000
hz, PCM, PCM
Mapping:
Output 0 maps to track 0, will play audio type <PCM (Auto)> as <PCM
Stereo> based on <Found discrete tracks for ITA>
Output 0 maps to track 1, will play audio type <PCM (Auto)> as <PCM
Stereo> based on <Found discrete tracks for ITA>
Total Pins: 2
Faults:
Final Output Mapping XML:
<XMLExtension>
<Outputs>
<Output pin="1" stream="0" type="5" sourceType="4" ID="0" />
<Output pin="2" stream="1" type="5" sourceType="4" ID="0" />
</Outputs>
March 2015 System Administrator Guide Page 212 of 404