Grass Valley UIM v.2.1.1 - Manual (Page 130)

130 UIM Instruction Manual February 5, 2008
Chapter 6 Service Information
19. When a “The data was successfully restored” message appears, click OK .
20. Exit the Acronis True Image program and restart.
21. Click File | Operations | Exit .
The machine restarts automatically.
22. Remove the CD from the CD drive while the machine is shutting down.
23. If restoring from a factory default image, upon restart you must enter the Windows
software license number, computer name, and password. Refer to “Part 3: Enter
Windows software license number” on page 133 .
24. Return to the “Restoring the system disk image” flow chart on page 127 to
continue.