Grass Valley UIM v.2.1.1 - Manual (Page 63)

February 5, 2008 UIM Instruction Manual 63
Configure the UIM network settings
c. When prompted to restart, click No . Wait until all connections are configured.
d. Repeat step b for the remaining team.
4. After all connections are configured, restart the UIM-SAN-GEIP.
5. Proceed to the next procedure “Connect UIM-SAN-GEIP network cables Dell
2650” .
a.
Primary designates the primary adapter for the team. Secondary designates the backup adapter. If the
primary connection is lost, then restored, it rejoins the team as a member and not the primary connection.
When redundant connections are not used, the unused port is ignored.