Grass Valley UIM v.2.1.1 - Manual (Page 163)

February 5, 2008 UIM Instruction Manual 163
Preparing the Profile Video Server (PDR family)
Preparing the Profile Video Server (PDR family)
Use the procedures in this section to prepare an existing Profile PDR Family Video
Server (PDR200 and up) for operation with the IP UIM.
This section includes:
• “Update Profile (PDR Family) System Software”
• “Enable Fibre Channel network TCP checksums”
Update Profile (PDR Family) System Software
Refer to “Software requirements” on page 20 to determine the Profile System
Software version required for UIM 2.x.x, then use the steps in the following sections
to determine the current Profile System Software version. Update Profile System
Software if needed.
Use this the following steps to verify and update the system software if needed.
1. Click Start | Programs | Profile Applications | Media Manager and check the version
number displayed at Help | About .
2. Refer to “Software requirements” on page 20 to determine the required Profile
System Software version.
3. Update the Profile System Software if required.
Follow software installation instructions in the release notes you receive with the
software.
Enable Fibre Channel network TCP checksums
When configuring PDR Video Servers (200 series and up), you must enable TCP
checksums on the Fibre Channel Network adapter. For instructions, refer to the Fibre
Channel Networking chapter in the Profile Family User Guide.