Grass Valley UIM v.2.1.1 - Manual (Page 81)

February 5, 2008 UIM Instruction Manual 81
Chapter
5
UIM-SAN-FCIP Installation:
Grass Valley Open SAN System
This chapter describes how to install the UIM-SAN-FCIP in the Grass Valley Open
SAN Shared Storage system. The UIM-SAN-FCIP provides a Fibre Channel IP
network interface to the Open SAN shared storage for media transfers.
Procedure summary:
• “Onsite planning”
• “Rack-mount the UIM”
• “Modify the master hosts file”
• “Configure the UIM network settings”
• “Connect UIM-SAN-FCIP network cables Dell 2850”
• “Install CVFS client software on the UIM-SAN-FCIP”
• “Perform miscellaneous system settings”
• “Enable Fibre Channel network TCP checksums”
• “Verify access to shared storage”
• “Test the UIM-SAN-FCIP functionality”
• “Create UIM-SAN-FCIP system disk image”