Polaris 2010 Victory Victory Vision 8-Ball - Manual (Page 162)

158
Maint
e
na
nce
Maintenance
Drive Belt / Rear Wheel Alignment
1. Look at the alignment reference marks
on each side of the swingarm and the
marks on the axle plates to verify proper
wheel alignment. Axle plate mark to ref-
erence mark alignment must be the same
on both sides.
2. If the marks are not aligned, perform all
steps of the Belt Tension Adjustment pro-
cedure. See page 157.
3. Before and after tightening the axle nut,
verify proper belt tension and wheel
alignment.
Axle Plate
Marks
Swing Arm
Marks
08 Maintenance.fm Page 158 Monday, May 11, 2009 2:03 PM