Polaris 2010 Victory Victory Vision 8-Ball - Manual (Page 181)

177
Ma
inte
nan
c
e
Maintenance
Hydraulic Clutch Fluid
1. Straddle the motorcycle and bring it to the fully
upright position. Position the handlebars so that the
fluid reservoir is level.
2. Wipe the fluid container and the area around the res-
ervoir cover with a clean cloth.
3. If the fluid level is low, check hoses, lines and the
slave cylinder for leaks.
4. To add fluid, remove the three reservoir cover
screws. Remove the cover and diaphragm. Carefully
add fluid to the top of the sight glass.
5. Reinstall the diaphragm, cover and screws.
Torque: 25 in-lbs (3 Nm)
6. Wipe away any fluid spills. Check for signs of fluid leaks around hoses, fittings, reser-
voir, and slave cylinder. Check for deterioration of hoses.
Minimum
Level
08 Maintenance.fm Page 177 Monday, May 11, 2009 2:03 PM