Polaris 2010 Victory Victory Vision 8-Ball - Manual (Page 320)

316
NA
V MP3
NAV MP3
Navigation MP3 Operation Tips
• Signals coming from the NAV MP3 unit will
override any source of the motorcycle’s audio
system to ensure navigation instructions are
communicated when needed. The signals will
also override the MP3 player.
• You must set volume levels within the NAV
MP3 unit. Volume settings in the motorcycle’s
audio system control NAV MP3 volume, but
navigation instructions may be difficult to hear
if volume levels in the unit are set too low. See
the GARMIN information for setting
procedures. The recommended initial settings
are 100/80/80: MASTER 100%, NAVIGATION
80%, MEDIA 80%.
• Pause or stop the MP3 player to switch to
radio.
• To switch from radio to MP3 player, change
the active source to AUX. For best sound
quality, change the AUX mode setting on the
radio from AUX to NAV MP3 when listening to
the MP3 player. Audio works in the AUX
setting, but the levels are not optimized.
• If playing MP3 files from the GARMIN ZUMO
660 unit, you may need to turn down the
"media volume" on the GARMIN unit to avoid
distortion.
9922441.book Page 316 Monday, May 11, 2009 1:16 PM