Polaris 2010 Victory Victory Vision 8-Ball - Manual (Page 213)

209
Ma
inte
nan
c
e
Maintenance
Front Turn Signal Bulb Replacement
1. Remove the windshield trim panel. See page 205.
2. Disconnect the wire harness from the socket
before removing the socket from the lens. Lift the
lock tab on the connector and push the connector
off the socket.
3. Rotate the bulb socket counter-clockwise 1/4 turn
and remove the socket with bulb. Remove the bulb
and install a new bulb. Reinstall the socket and
rotate it 1/4 turn clockwise.
4. Reconnect the wire harness. Be sure it snaps
securely into place over the connector lock tab.
IMPORTANT
Disconnect the wire harness from
the socket before removing the
socket from the lens.
08 Maintenance.fm Page 209 Monday, May 11, 2009 2:03 PM