HEIDENHAIN TNC 426B (280 472) ISO programming - Manual (Page 8)

Contents
Contents IV
1 INTRODUCTION ..... 1
1.1 The TNC 410, The TNC 426, and The TNC 430 ..... 2
1.2 Visual Display Unit and Keyboard ..... 3
1.3 Modes of Operation ..... 5
1.4 Status Displays ..... 9
1.5 Accessories: HEIDENHAIN 3-D Touch Probes and Electronic Handwheels ..... 14
2 MANUAL OPERATION AND SETUP ..... 15
2.1 Switch-on, Switch-off ..... 16
2.2 Moving the Machine Axes ..... 17
2.3 Spindle Speed S, Feed Rate F and Miscellaneous Functions M ..... 19
2.4 Datum Setting (Without a 3-D Touch Probe) ..... 20
2.5 Tilt the working plane (not TNC 410) ..... 21
3 POSITIONING WITH MANUAL DATA INPUT (MDI) ..... 25
3.1 Program and Run Simple Machining Operations ..... 26
4 PROGRAMMING: FUNDAMENTALS OF NC, FILE MANAGEMENT,
PROGRAMMING AIDS, PALLET MANAGEMENT ..... 31
4.1 Fundamentals of NC ..... 32
4.2 File Management: Fundamentals ..... 37
4.3 Standard file management TNC 426, TNC 430 ..... 38
4.4 Expanded File Management TNC 426, TNC 430 ..... 43
4.5 File Management for the TNC 410 ..... 56
4.6 Creating and Writing Programs ..... 59
4.7 Programming Graphics (not TNC 426, TNC 430) ..... 66
4.8 Adding Comments ..... 68
4.9 Creating Text Files (not TNC 410) ..... 69
4.10 The Pocket Calculator (not TNC 410) ..... 72
4.11 Direct Help for NC Error Messages (not TNC 410) ..... 73
4.12 Help Function (not TNC 426, TNC 430) ..... 74
4.13 Pallet Management (not TNC 410) ..... 75
Cinhalt.pm6 29.06.2006, 08:05 4