HEIDENHAIN iTNC 530 (340 49x-01) ISO programming - Manual (Page 128)

128 4 Fundamentals of NC, File Management, Programming Aids, Pallet Management
4.12 P
a
llet Manag
e
ment
Selecting a pallet table
8 Call the file manager in the Programming and Editing or Program
Run mode: Press the PGM MGT key.
8 To display all type .P files, press the soft keys SELECT TYPE and
SHOW .P.
8 Select a pallet table with the arrow keys, or enter a new file name
to create a new table.
8 Confirm your entry with the ENT key.
Leaving the pallet file
8 To call the file manager, press the PGM MGT soft key.
8 To select a different type of file, press the SELECT TYPE soft key
and the soft key for the desired file type, for example SHOW.H.
8 Select the desired file.