HEIDENHAIN iTNC 530 (340 49x-01) ISO programming - Manual (Page 350)

350 8 Programming: Cycles
8.6 SL Cy
cles
FLOOR FINISHING (Cycle G123)
The tool approaches the machining plane smoothly (in a vertically
tangential arc). The tool then clears the finishing allowance remaining
from rough-out.
8 Feed rate for plunging Q11: Traversing speed of the
tool during penetration.
8 Feed rate for milling Q12: Traversing speed for
milling.
Example: NC block
N60 G123 FLOOR FINISHING
Q11=100 ;FEED RATE FOR PLUNGING
Q12=350 ;FEED RATE FOR ROUGHING
X
Z
Q11
Q12
The TNC automatically calculates the starting point for
finishing. The starting point depends on the available
space in the pocket.