SMA MULTICLUSTER BOX 36 - Manual (Page 18)

6 Installation SMA Solar Technology AG
18 MC_BOX_36-BE-en-20 Operating Manual
2. In each corner, attach one lifting lug with one
sealing disc (torque: 10 Nm to 35 Nm).
6.3.3 Transporting and Mounting the Multicluster Box
Danger of crushing if the raised Multicluster Box tips over, falls, or sways during lifting
The Multicluster Box can topple or fall if it is lifted and transported carelessly or hastily. This may
result in death or serious injury.
• When transporting the Multicluster Box, always keep it as close to the ground as possible.
• Use means of transportation which are adequate for the weight of the Multicluster Box
(max. 400 kg).
• Transport the Multicluster Box in an upright position.
• Keep a safe distance from the Multicluster Box at all times during transport.
• Observe the center of gravity of the
Multicluster Box. The center of gravity of the
Multicluster Box is located approximately in the
center of the cabinet and is marked on the
enclosure with the center of gravity symbol.
• When using lifting lugs, remember to maintain a
minimum angle of 45° between the cable pull
and the Multicluster Box.