SMA MULTICLUSTER BOX 36 - Manual (Page 23)

SMA Solar Technology AG 7 Electrical Connection
Operating Manual MC_BOX_36-BE-en-20 23
7.3 Removing Protection against Contact
Figure 10: Positions of the attachment points of the contact hazard protection cover
Procedure:
1. Remove all pan head screws with washers from the contact hazard protection cover, and
remove the cover. Use a TX 30 screwdriver.
2. Set the contact hazard protection cover, pan head screws and washers aside for later use.
Position Number Description
A 1 Contact hazard protection cover of the Multicluster Box
B 6 Positions of the attachment points
Electrostatic discharge can cause irreparable damage to the Multicluster Box
• Ground yourself before touching any component.