SMA MULTICLUSTER BOX 36 - Manual (Page 26)

7 Electrical Connection SMA Solar Technology AG
26 MC_BOX_36-BE-en-20 Operating Manual
12. Turn the handle of the fuse holder up.
13. Connect the grounding conductor to the grounding
busbar (AF 19, torque: 25 Nm). Make sure to
adhere to the following screw assembly:
screw head / grounding busbar / terminal lug /
fender washer / spring washer / nut.
14. Connect the neutral conductor to the busbar
MC-X1 (AF 19, torque: 25 Nm). Make sure to
adhere to the following screw assembly:
screw head / busbar / terminal lug / fender
washer / spring washer / nut.
15. Attach the connection cable to the designated cable support rail. Use the cable clamps and
counter sleeves supplied.
Securing the cable in the support rail relieves the strain on the cable at the connection point.