SMA WEBBOX-BT-20 Installation - Manual (Page 10)

Safety SMA Solar Technology AG
10 SWebBox20-IA-en-12 Installation Manual
2.1.1 Supported Products
The Sunny WebBox supports the following SMA products:
• all SMA inverters with integrated Bluetooth
• SMA inverters with retrofitted SMA Bluetooth Piggy-Back/SMA Bluetooth Piggy-Back Plus from
firmware version 02.00.00.R. A list of the supported inverters can be found in the
SMA Bluetooth Piggy-Back/SMA Bluetooth Piggy-Back Plus manual.
• Sunny Backup with retrofitted SMA Bluetooth Piggy-Back Off-Grid from firmware
version 01.00.00.R. A list of the supported Sunny Backups can be found in the
SMA BluetoothPiggy-Back Off-Grid manual.
• Power Reducer Box
• Sunny Matrix from firmware version 2.10.00
• SMA Bluetooth Repeater
• Sunny SensorBox with SMA Power Injector with Bluetooth
• SMA radio-controlled socket
2.1.2 Target Group
This document is intended for end users and skilled persons. When you log in to the Sunny WebBox
there are two user groups at your disposal, "Installer" and "User". The "Installer" user group may only
be used by qualified personnel who are authorised to make changes to grid-relevant parameters for
the connected devices.
Inverters of type SB x000TL-20 are only supported from firmware version 2.06
• In those inverters with a firmware version below 2.06, update the inverter firmware
via SD card (see technical description "Firmware Update with SD Card" at
www.SMA-Solar.com).
Updating the firmware of SMA products
In order for Bluetooth communication to function correctly in the plant, the firmware of the
SMA products must be completely up to date.
• Before commissioning the Sunny WebBox, update the firmware of the SMA products
(see the manuals of the SMA products).