SMA WEBBOX-BT-20 Installation - Manual (Page 34)

Logging into and out of the Sunny WebBox SMA Solar Technology AG
34 SWebBox20-IA-en-12 Installation Manual
7 Logging into and out of the Sunny WebBox
7.1 Logging into the Sunny WebBox
1. Start Internet browser (e.g. Internet Explorer).
2. If you use DHCP for the Sunny WebBox (default setting), enter the URL
http://WebBox"serial number", e.g., http://WebBox895903467 in the address bar and
press the enter key. Tip: you can find the serial number on the type label (see Section 4.2 "Type
Label" (page 14)) or determine it using the SD card (see Section 9.4 "Determining the Current
Network Settings of the Sunny WebBox via the SD Card" (page 43)).
☑ The Sunny WebBox login page opens.
– If the page does not open, refer to Section 12.1 "General Troubleshooting for the Sunny
WebBox" (page 47).
3. If you are using static network settings for the Sunny WebBox, enter the static IP address of the
Sunny WebBox in the address bar and press the enter key. If you do not know the IP address
of the Sunny WebBox, see Section 9.4 "Determining the Current Network Settings of the Sunny
WebBox via the SD Card" (page 43).
☑ The Sunny WebBox login page opens.
– If the page does not open, refer to Section 12.1 "General Troubleshooting for the Sunny
WebBox" (page 47).
4. Select the desired language.
5. In the "User" field, select the user group you wish to log in to.
6. In the "Password" field, enter the password belonging to the selected user group.
7. Select [Login].
☑ The Sunny WebBox user interface opens
Unauthorised access to your PV plant
The plant password protects your plant from unauthorised access.
• After logging in for the first time, change the default password for both user groups.
Plant password at delivery
All devices are delivered with the user password 0000 and the installer password 1111.