Restarting the sunny webbox via the user interface – SMA WEBBOX-BT-20 Installation User Manual
Page 41
Advertising
SMA Solar Technology AG
Service Functions
Installation Manual
SWebBox20-IA-en-12
41
9.2 Restarting the Sunny WebBox via the User Interface
1. Select the Sunny WebBox in the plant tree and select "Settings" in the device menu.
2. Select the "Device > System" parameter group.
3. In the "Initiate device restart" field, select [Execute].
4. Select [OK].
☑ The Sunny WebBox is restarted. The restart was successful if the "SYSTEM" and "POWER" LEDs
glow green again. The start-up procedure can take up to 90 seconds.
– If the "SYSTEM" or "POWER" LEDs do not glow green, please refer to Section 12.1 "General
Advertising