SMA SB 3300-11 Installation - Manual (Page 29)

SMA Solar Technology AG Electrical Connection
Installation Manual SB33-38-11-IA-en-62 29
5.4 Setting the Display Language
You can set the language of the display using the switches at the bottom of the display assembly inside
the inverter.
Procedure
1. Open the inverter as described in section 7.2 "Opening the Inverter" (page 41).
2. Set the switches to the required language, as
shown below. The following switch settings apply:
3. Close the inverter as described in section
7.3 "Closing the Inverter" (page 43).
☑ The display language is set.
Language Switch S2 Switch S1
German B B
English B A
French A B
Spanish A A