SMA SB 3300-11 Installation - Manual (Page 32)

Electrical Connection SMA Solar Technology AG
32 SB33-38-11-IA-en-62 Installation Manual
4. Push the cable gland to the thread and tighten it (torque: 2 Nm).
☑ The DC connectors are assembled and can now be connected to the inverter as described in
section 5.5 "Connecting the PV Array (DC)" (page 30).
☑ If the stranded wire is not visible in the
chamber, the cable is not correctly
positioned.
• Loosen the clamping bracket. To do so,
insert a screwdriver into the clamping
bracket and lever the clamping bracket out
(blade width 3.5 mm).
• Remove the cable and go back to step 1.
Result Measure