SMA SB 3300-11 Installation - Manual (Page 63)

SMA Solar Technology AG Decommissioning
Installation Manual SB33-38-11-IA-en-62 63
9. Remove the safety screw.
10. Lift the inverter off the wall mounting bracket.
☑ The inverter is disassembled.
10.2 Packing the Inverter
If possible, always pack the inverter in its original packaging. If it is no longer available, you can also
use an equivalent carton. The carton must be completely closeable and made to support both the
weight and the size of the inverter.
10.3 Storing the Inverter
Store the inverter in a dry place where ambient temperatures are always between
‒25°C and +60°C.
10.4 Disposing of the Inverter
Dispose of the inverter at the end of its electrical endurance in accordance with the disposal
regulations for waste electrical and electronic equipment which apply at the installation site at that
time. Alternatively, send it back to SMA Solar Technology AG with shipping paid by sender, and with
the information "ZUR ENTSORGUNG" ("for disposal") (see section 13 "Contact" (page 72)).