3 opening the dc connector, Opening the dc connector – SMA SB 3300-11 Installation User Manual
Page 33
Advertising
SMA Solar Technology AG
Electrical Connection
Installation Manual
SB33-38-11-IA-en-62
33
5.5.3 Opening the DC Connector
1. Unscrew the screw connection.
2. Unlock the DC connector. To do this insert a
screwdriver into the side catch mechanism and
lever out (blade width 3.5 mm).
3. Carefully pull the DC connector apart.
4. Loosen the clamping bracket. To do so, insert a
screwdriver into the clamping bracket and lever the
clamping bracket out (blade width 3.5 mm).
5. Remove the cable.
☑ The cable is removed from the DC connector.
Advertising
This manual is related to the following products: