Yaskawa CM092 - Manual (Page 6)

Yaskawa America, Inc. – www.yaskawa.com
IG.AFD.26, Page 6 of 16
Date: 08/18/2011 Rev: 11-08
EtherNet/IP Option Kit
CM092
17. Drive labeling and EDS files
18. EtherNet/IP Option Card fault codes
a. Place the supplied MAC ID label on the side of the drive either above or below the drive nameplate.
Nameplate for all drives except G5HHP drives Nameplate for G5HHP drives
b. To simplify the drive configuration, EDS file can be obtained at www.yaskawa.com . Select Downloads, By Inverter Drives, By Product, and Network
Comms-Ethernet. Then select the appropriate EDS file based on the drive series and the latest version from those listed. EDS files for individual drive
models are compressed into a single Zip file.
MODEL: CIMR-G7U20P4 SPEC: 20P41A
INPUT: AC3PH 200 - 240V 50/60Hz 3.8A
OUTPUT: AC3PH 0 - 240V 0 – 400Hz 3.2A 1.2kVA
O/N:
MASS: 3.0kg
S/N: 1W0149999991W0001 PRG:
1W0149999991W0001
FILE NO: E131457
MAC ID: 00-20-B5-24-11-13
INVERTER MODULE
CODE NO.: EUJ615162
SERV. NO.: 4W06X7847760001
MASS: 125KG
YASKAWA AMERICA, INC.
MAC ID: 00-20-B5-24-11-13
The table of EtherNet/IP Option Card fault codes returned by the drive is shown below. Refer to the appropriate drive user and/or programming manual(s) for drive
specific information on the fault returned.
Note: G5HHP drive differences are denoted by bold text inside carets <> in the following table.
EtherNet/IP Fault Code
[hex]
Description
EtherNet/IP
Fault Code
[hex]
Description
0000h None 5300h OPE errors (01,02,03,05,06,07,08,09,10,11)
2120h Ground Fault (GF) 6320h EEPROM R/W Error (ERR)
2130h Short Circuit (SC) 7110h Dynamic Braking Transistor (RR) <Reserved>
2200h
Inverter Overload (OL2) 7112h Dynamic Braking Resistor (RH) <Reserved>
2220h Motor Overload (OL1) 7301h PG Open (PGO)
2221h Overtorque Detection 1 (OL3) 7310h Overspeed Detection (OS)
2222h Overtorque Detection 2 (OL4) 7310h Speed Deviation (DEV)
2300h Overcurrent (OC) 7500h EtherNet/IP Communication Error (BUS)
2310h High Slip Braking (OL7)
<Reserved>
8110h Feedback Loss (FBL)
3130h Input Phase Loss (PF) 8313h Zero Servo Fault (SVE)
3130h Output Phase Loss (LF) 8321h Out of Control (CF)
3210h DC Bus Overvoltage (OV) 8321h Undertorque Detection 1 (UL3)
3220h DC Bus Undervoltage (UV1) 8321h Undertorque Detection 2 (UL4)
3222h MC Answerback (UV3) 9000h External Fault on Terminal S3 (EF3) <External Fault 3 (EF3) (Terminal 11)>
4200h Heatsink Over-temperature (OH) 9000h External Fault on Terminal S4 (EF4) <External Fault 4 (EF4) (Terminal 12)>
4210h Heatsink Maximum Temperature
(OH1)
9000h External Fault on Terminal S5 (EF5) <External Fault 5 (EF5) (Terminal 13)>
4300h Motor Overheat 1 (OH3) 9000h External Fault on Terminal S6 (EF6) <External Fault 6 (EF6) (Terminal 14)>
4310h Motor Overheat 2 (OH4) 9000h External Fault on Terminal S7 (EF7) <External Fault 7 (EF7) (Terminal 15)>
5110h CTL PS Undervoltage (UV2) 9000h External Fault on Terminal S8 (EF8) <External Fault 8 (EF8) (Terminal 16)>
5120h DC Bus Fuse Open (PUF) 9000h External Fault Through Option Card (EF0)
5300h Operator Disconnected (OPR) - -