Yaskawa VS-616G5 Modbus Plus Communication Card - Manual (Page 105)

Data Registers A-25
Drive Parameter Registers (Read/Write) – continued
REGISTER PARAMETER PARAMETER PARAMETER LIMITS / DESCRIPTION INITIAL
(in hex) FUNCTION SETTING VALUE
30Eh E2-01 Motor Rated Current 0.60 to 12.00 A (2)
30Fh E2-02 Motor Rated Slip 0.00 to 20.00 Hz (2)
310h E2-03 Motor No-Load Current 0.00 to 3.29 Amps (2)
311h E2-04 Number of Motor Poles 2 to 48 poles 4
312h E2-05 Motor Line-to-Line Resistance 0.000 to 65.000 Ohms (2)
313h E2-06 Motor Leakage Inductance 0.0 to 30.0% (2)
314h E2-07 Motor Iron-core Saturation Coefficient 1 0.00 to 0.50 .50
315h E2-08 Motor Iron-core Saturation Coefficient 2 0.00 to 0.75 0.75
316h E2-09 Motor Mechanical Loss 0.0 to 10.0% 0.0
Notes (for this page only):
(1) Initial Value differs depending on the control method (A1-02).
(2) Values differs depending on the drive capacity.