Irritrol Climate Logic - Manual (Page 13)

Setup Menu Options
13
Setup Menu Options
The following Setup features are accessed through the ET Setup
menu ( MENU _ SETUP _ENTER ).
All setup parameters are selected, adjusted and entered using the
NExT/BACK , / and SAVE keys.
Auto Program Adjust: In all cases, Climate Logic regulates the
run time of all stations assigned to Program A. The Auto Program
Adjust feature enables stations assigned to Program B, or Programs
B and C to be regulated as well.
Watering Restriction Setup: This feature enables the Climate
Logic system to restrict watering for a specified daily time period.
The restriction-period start time can be set to any hour of the day.
The duration period can be set from 0 to 24 hours, in 30-minute
increments.
Schedule Update Time: The Weather Sensor transmits weather-
related data to the Receiver Module at regular intervals throughout
the day. At the default time of 8:00 p.m., the watering adjustment
factor for the next 24 hours is calculated and updated on the Home screen. The Schedule Update Time can
be set to any hour of the day, but is recommended to occur between scheduled watering operations.
Average Percent Days: This setting defines how many days of compiled weather data are used to calculate
the current watering adjustment % factor. By default, Climate Logic compiles data from the three previous
days to provide a moderately smooth adjustment factor. This feature can be adjusted from 1 to 7 days.
Decreasing the number of days, increases the adjustment variation; increasing the number of days results
in less variation and a smoother daily average.
ET Setup
Auto Program Adjust A
Water Restrict NONE
Water Restrict Time(hr) 0.0
SAVE
1 of 3
BACK CANCEL NEXT
ET Setup
Schedule Update 08:00 P.M.
Average Percent Days 3
SAVE
2 of 3
BACK CANCEL NEXT
CL User Guide Final Edit.indd 13 2/11/11 5:19 PM