Irritrol Climate Logic - Manual (Page 16)

16
Rain/Freeze Sensor Control Feature
Rain/Freeze Sensor Control Feature
When rain or a low temperature condition is detected, system
operation is placed on hold. The Sun icon is replaced with the
corresponding Rain Cloud or Snow Flakes icon. The LED status
indicator is on continuously while the system is on Hold.
When weather conditions improve, the Climate Logic system
automatically resets for normal operation. An adjustable
Dry-out period will prevent automatic watering for 12 hours (by
default) before scheduled watering can resume. The Dry-out
mode is adjustable from 0 to 3 days, in 1/2-day increments.
To adjust the Dry-out time period, refer to the Dry-out Days
setup procedure on page 14.
Note: To resume watering operation immediately after the reset,
press the
BYPASS key to skip the Dry-out mode.
Smart Bypass Mode: While the system is on hold, sensor control
can be toggled Off and On by pressing the
BYPASS key. The
Bypass mode will be indicated on the Home screen, and the
LED indicator will blink continuously. Watering operations can
resume, however the Climate Logic system will remain in the
Bypass mode until the system automatically resets after the
Dry-out duration times out.
Note: To resume sensor control mode, press the
BYPASS key again
to toggle the Bypass mode Off.
CLIMATE LOGIC
MENU
10:15
a
Rain Sensor - Bypassed
52
F
40%
BYPASS
11/16
CLIMATE LOGIC
52
F
40%
Dry Out Remain 12h
MENU
10:15
a
BYPASS
11/16
CLIMATE LOGIC
MENU BYPASS
10:15
a
Rain - No Irrigation
11/16
52
F
40%
CLIMATE LOGIC
MENU BYPASS
3:15
a
Cold - No Irrigation
1/10
32
F
40%
CL User Guide Final Edit.indd 16 2/11/11 5:19 PM