Enterasys Networks Fast Network 10 - Manual (Page 112)

Chapter 6: FN10 Diagnostics and Troubleshooting
Page 6-8 Fast Network 10 User Guide
6.5.3 FN10 Has Rebooted
• Use the LCM ident command to check the FN10 diagnostic codes,
and call your authorized Cabletron Systems representative.
6.5.4 FN10 Does Not Respond to NMS
• Check the port status using LCM.
• Check to see if the Spanning Tree topology is stable using LCM.
• Check that a pathway to the FN10 exists.
• Verify the FN10’s IP address using LCM.