Enterasys Networks Fast Network 10 - Manual (Page 99)

Configuring a Port Filter
Fast Network 10 User Guide Page 5-19
5.5 CONFIGURING A PORT FILTER
To configure a Port filter, use the Local Console Manager (LCM). The
LCM prompts you through the fields for each Port filter you want to
configure. If you are adding a Port filter to be used in conjunction with
another Port filter, and the filters must be ordered sequentially, use the
LCM
filters display command to find the filter index number of the
existing Port filter.
After you have configured a Port filter, the LCM display would look
something like the example shown below. Your actual display depends on
how you have configured your Port filter.
See Table 5-2 for information on the configurable fields.
Port Number? >1
DestRangeStart:
DestRangeEnd:
DestRangeMask:
ProtocolMatch:
ProtocolType:
FieldMatch:
FieldOrigin:
FieldOffset:
FieldValue:
FieldMask:
Operator:
PktCnts:
Octets:
LasrSRC:
Type <cr> to display the next filter ...>
Index:
Type:
Pseudo:
SourceRange:
SourceRangeStart
SourceRangeEnd:
SourceRangeMask
DestRange: 1
Entry
True
True
00:00:00:00:00:00
00:00:00:00:00:00
ff:ff:ff:ff:ff:ff
True
00:00:00:00:00:00
00:00:00:00:00:00
ff:ff:ff:ff:ff:ff
True
LLC
True
IP
0
00:00:00:00:00:00:00:00
ff:ff:ff:ff:ff:ff:ff:ff
And
0
0
00:00:00:00:00:00