Enterasys Networks Fast Network 10 - Manual (Page 69)

Using LCM to Check FN10 Status
Fast Network 10 User Guide Page 4-9
• Address display
• Ipaddr
• Ident
These LCM commands are described in the sections that follow.
4.3.1 Displaying Status
The status command displays the status of the FN10 and automatically
pages through the status of all of the Ethernet ports, pausing at each
screen of information.
At the LCM prompt:
1. Type status
LCM displays the following type of information.
NOTE
You can also use the status command to display status for
individual Ethernet ports by typing status and specifying a port
number.