Enterasys Networks Fast Network 10 - Manual (Page 31)

Fast Network 10 User Guide Page 2-1
CHAPTER 2
UNPACKING AND INSTALLING
YOUR FN10
Carefully unpack the FN10 from the shipping carton and inspect it for
possible damage. If any damage is evident, contact your supplier. The
shipping carton contains the following:
• The FN10 unit
• One AC power cord
• Console Cable kit
• Two rack-mounting brackets with fasteners (for rack-mount
installation)
• Four stick-on feet (for desktop installation)
• Documentation – In addition to this manual, the Fast Network 10
Quick Setup card, the Fast Network 10 Local Console Manager
(LCM) Commands Reference Card, the Fast Network 10 MIB
Reference Guide, and Release Notes are also included.
2.1 FN10 PANELS
The FN10 provides 12 or 24 10BASE-T Ethernet ports, including one
Ethernet Attachment Unit Interface (AUI) connection. Each FN10 also
includes an RS232C port for out-of-band management, and can be
configured with two additional Fast Ethernet (100 Mbps) ports.
Figure 2-1 shows the FN10’s front and rear panels. The LEDs and buttons
are described in Tables 2-1 and 2-2.