Enterasys Networks Fast Network 10 - Manual (Page 48)

Chapter 3: Configuring Your FN10
Page 3-6 Fast Network 10 User Guide
3.3 DISABLING BRIDGING
To turn off the bridging function for a port or port range, at the LCM
prompt:
1. Type bridge [PORT-RANGE] off
For example, bridge 2 off would disable bridging on port 2.
LCM responds:
3.4 DISPLAYING BRIDGING FUNCTIONS
To display the bridging functions that are enabled for all ports, at the
LCM prompt:
1. Type bridge
LCM responds with a list of all ports and the bridging function that is
enabled. For example, typing
bridge would display the bridging status
for all ports.
You could also type bridge [PORT-RANGE] to look at a specific range
of ports. For example bridge 2-4 would display bridging functions for
ports 2, 3, and 4.
Port 2 bridging: off
Port 1 bridging: Transparent Bridging
Port 2 bridging: Transparent Bridging
Port 3 bridging: Transparent Bridging
.
.
Port 24 bridging: off
Usage: bridge [PORT-RANGE [{off|on|noBPDU{]]
Port 4 bridging: Transparent Bridging
.