Epson 7900p - Manual (Page 21)

Setting Up the Projector 21
Connecting a Composite Video Source
1. Locate an RCA-style video cable (one may be included with your
video equipment).
2. Connect the cable to the yellow video output connector on your
player and the yellow Video connector on the projector:
3. If you want to play sound through the projector, see page 33 for
instructions on connecting an audio cable.
4. If you don’t need to make any other connections, see Chapter 2
or the Quick Setup sheet for instructions on turning on the
projector and adjusting the image.
5. Once the projector is turned on, enter the projector’s Video menu
and make sure Video Signal is set to Auto ; see page 74.