Epson 7900p - Manual (Page 95)

Managing the Projector from a Remote Computer 95
Controlling Your Projectors
The control buttons in the upper-right let you turn on and off the
projectors and select video sources. (Hold the mouse pointer over a
button to see a description of its meaning.) Make sure you’ve selected
the projector you want to operate (with the mouse pointer) before
clicking one of the buttons.
Configuring the Monitoring Interval
If you need to have the most current status information about your
projectors, click the
Refresh button in the EMP Monitor screen.
You can also select how often EMP Monitor checks the projector
status:
1. From the Tool menu, select Configuration . You see this screen.
2. Select the desired update interval and click OK .
note
To turn on a projector when
it’s in standby mode
(plugged in but not
projecting), you must have
selected
Network ON as the
Standby Mode setting in
the projector’s menu system
(see page 75).
Remember that when
Standby Mode is set to
Network ON , the exhaust
fan continues to operate
after the projector has cooled
down. This is normal.
Control buttons
note
If you want EMP Monitor
to run whenever you start
your computer, click
Add to
Startup .