Epson 7900p - Manual (Page 60)

60 Using the Remote Control
2. Use the pointer button on the remote control to position the
pointer on the screen.
3. To draw a straight line, place the pointer where you want the line
to begin and press Enter . Move the pointer to where you want the
line to end, and press Enter again.
4. To draw a curved line, place the pointer at the start of the line,
then press and hold the Enter button until it lights. Then use the
pointer button to move the pointer and draw on the screen.
Press E SC when done.
5. If you want to draw additional lines, repeat steps 3 and 4.
6. When done drawing, press E SC to clear the screen.
Customizing the Pointer Tools
You can customize the shape and size of each of the three pointer
tools, select the color and width of the line made with each pointer,
and set how fast you can move the pointer across the screen.
1. Press the Menu button on the remote control, highlight the
Effect menu, and press Enter .
You see this screen:
Set Set Video Video
Audio Audio
Setting Setting
User's Logo
User's Logo
Advanced1 Advanced1
Color Mode Color Mode
Pointer/Line1 Pointer/Line1
Color Color
:
:
[Menu]: Exit [Menu]: Exit
Pointer Speed Pointer Speed :
[ ]: Enter [ ]: Enter [ ]: Select [ ]: Select
About About
Reset All Reset All
Advanced2 Advanced2
Effect Effect Zoom Rate Zoom Rate : 100% 100%
Color
Set Set Pointer/Line2 Pointer/Line2
Set Set Pointer/Line3 Pointer/Line3
Zoom Rate Zoom Rate : 100% 100%
Zoom Rate Zoom Rate : 100% 100%
L M
Execute Execute
:
: Color
Width
H
Reset Reset