Epson 7900p - Manual (Page 91)

Managing the Projector from a Remote Computer 91
2. Click Register projector as shown.
You see this screen:
3. Click Auto detect to locate projectors currently operating on the
network. Or click Manual registration and enter the projector’s
name and network address.
Any projectors found on the network are listed as shown below:
4. Select each projector you want to add by clicking its name, then
clicking the Add button. When you’re done adding projectors,
click Close .
Click here
note
If Auto detect fails to find
the projector, your projector
may not be connected or
configured correctly for the
network. See page 87.
Click here