Epson 7900p - Manual (Page 76)

76 Fine-tuning the Projector
Miscellaneous Setup Options
■ No-Signal Msg. (in the Setting menu)
Selects a screen color or image to display when the projector is
not receiving a signal. The logo setting displays an image that
you previously transferred to the projector (see page 78).
■ Sleep mode (in the Setting menu)
When sleep mode is on, the projector turns off the lamp if it
has not received any input signals for 30 minutes. Turn sleep
mode off if you want the lamp to remain on all the time (this
is the default setting).
■ Message (in the Setting menu)
Selects whether the image source or the color mode is
displayed on the screen.
■ Rear Proj. (in the Advanced1 menu)
Turn on to project from behind onto a transparent screen.
■ Ceiling (in the Advanced1 menu)
Turn on when the projector is mounted upside-down from
the ceiling.
■ Language (in the Advanced1 menu)
Select from nine languages to be used for the projector
menus.
■ Direct Power ON (in the Advanced2 menu)
When this option is enabled, projection starts as soon as you
plug in the power cord. You don’t need to press the
P
Power button.
note
When Direct Power ON
is enabled, turn off your
projector as you normally
would; see page 49 for
details.